A hoe or a hoe is an indispensable tool in any suburban area and garden. With the help of this gardening equipment, it is very convenient to weed beds, remove weeds and plant roots, loosen the soil, and also perform other work. A powerful chopper can be made independently - from a piece of a profile pipe 100x100 mm.
The main stages of work
From a profile pipe 100x100 mm, it is necessary to cut a piece with a length of about 15-20 cm, and then cut off from it about 1/3 at an angle of 30-35 degrees. For chopping we will use only most of the profile pipe. Next, we make the cutting edge with the help of a grinder, after which we clean the surface with a petal grinding wheel.
Now we begin to manufacture the second part of the chopper - for this we cut a small piece from a round pipe, make a triangular slot at one of the ends, and then weld the part to the profile at a small angle. Also, in the pipe segment, it is necessary to drill two holes for fastening.
At the next stage, you will need to make a holder or use a ready-made stalk, if available (for example, from an old hoe or rake). Then insert the holder into the tube and fasten to two screws. The result is a versatile and powerful enough homemade chopper for the garden and garden. See the detailed manufacturing process in the video on the website.
