A doorbell meets guests earlier than the apartment owners themselves. Therefore, he, as a real keeper of peace, can protect the home from uninvited guests. Especially if it is made in the form of a trap. After all, not everyone will decide to click on it.
We make a base blank from beech on a milling machine, round off the edge and grind it. We paint in black. Then again we process with a mill, it turns out a beautiful pattern. And also we write the word "Call" so that people know what it is. In principle, all these operations can be done manually, it just takes longer.
We cut out our base, varnish with a glossy protective varnish. Next, from the working surface of the trowel we make the basis of the trap. We saw off the handle, measure the permissible sizes, apply them to the trowel.
We cut out the base, grind the edges, and then bend. At the hacksaw, saw off the teeth with a width of about 2 centimeters, remove two teeth from the edge. Since the hacksaw is hot, it is necessary to treat it with a gas burner (let go) so that it can be drilled.
The main stages of work
Cut out the square for the call button. We round the corners. At the ends of the teeth we make a hole for attaching to the base. On the basis of also make holes for fastening, cut off the excess metal. We fix the teeth to the base, bending them into an arc.
We make an imitation of mounting the trigger. For greater realism we stretch the springs. Next, we make the trigger. In the center of the trap we drill a hole for the bell button and attach the mechanism to the wooden base.
We drill a hole in the tree for the bell button. Putting the trigger. Then you will need to glue the plate, which is the bell button. On a wooden base, on the other hand, we prepare a place for the transmitter board.
We make a brass sleeve, which is pressed into the landing "nest". We set the call charge. We twist the screws and install the central stem for pressing the button. We fix the trap. An unusual call is ready. See the video on our website for more details.
