If you decide to make your own non-standard brazier for a summer house or a private house, then this idea should be liked by you.
In this case, the author decided to make a brazier with a double bottom from a corrugated sheet 4 mm thick, and also to make an original stand for it from a profile pipe.
The first step is to cut the barbecue blanks from corrugated sheet. In total, six workpieces will be required for work: four side walls and two sheets to make that double bottom in the barbecue.
The main stages of work
To the bottom sheet of the double bottom, it is necessary to weld segments of the steel square, but first you need to make markings on the metal sheet itself.
Next, you need to weld four walls to the bottom, exposing them at an angle of 90 degrees to the base. After that, the second bottom drops onto the square pins, and is welded. Previously, it will be necessary to drill holes in it.
At the last stage of work, the main elements of the barbecue stand are already made from a profile pipe on a roll forming machine. Then all the parts are welded together. At the bottom of the stand, the master provided a grill.
Next, the final assembly is performed. For details on how to make a brazier with a double bottom and an original stand, we recommend that you look in the video on our website.
