Breathing dust (especially when there is a lot of it) is harmful to health. And in the workshop of this "good" is more than enough. Therefore, to purify indoor air, the author suggests making a simple air filter with his own hands.
As the basis for this homemade work, the author uses a car filter (from the Gazelle), which costs between 250-300 rubles. You will also need an inexpensive exhaust fan (you can buy it at a hardware store).
The first step is to install the fan in the filter. But in this case, the frame on the front panel interferes - it will need to be carefully cut. The edges then need to be slightly trimmed, and cleaned with sandpaper.
The main stages of work
At the next stage, the master connects a wire to the fan motor, but first it must be passed through the hole in the filter. The wires are connected using the terminal block.
Next, the fan housing must be inserted into the car filter. If everything is done correctly, then the air should be sucked in through the filter and exit through the outlet "window" in the fan.
Then it will be necessary to fasten the metal furniture corner to the filter so that it can be fixed on a wooden beam or in another place.
For more information on how to make a simple air filter for the garage and workshop, we recommend that you watch in the video on the website.
