For the manufacture of crafts, various purchased tools are very often used, which can not always complete the task quickly and efficiently.
A DIY tool made from improvised materials will significantly save money and will become indispensable in your home. This fact applies to homemade plywood scraps, which are very simple to make.
To make the fixture, a small piece of plywood, approximately 20 mm thick, will be required. First you need to draw and cut 4 rectangles, 20 * 70 mm in size, and then polish the edges.
The process of manufacturing a tool for grinding workpieces
We cut off the cut bars into pairs. In the first pair we drill two holes closer to the edges. On the remaining two bars we mark out three equidistant points and also drill them.
After these steps, you need to drill small recesses for the bolts. Next, you need to measure a piece of sandpaper, 320 mm long and 50 mm wide, and clamp the edges into homemade block clamps.
The resulting plywood clamps with sandpaper can be installed on the holder for hacksaw blades. Homemade ready to use.
The main advantage of a home-made tool is the quick processing of convex and semicircular parts due to the flexibility of the emery tape.
Its manufacture will not take you much time, and further work will bring pleasure. A more detailed process of making the instrument with your own hands can be viewed in the video on the site.
