In this review, the author shows how to make a wheel lever to lift various weights. The device can be useful in a private house or in the country.
For the manufacture of homemade products you will need two wheels from a car, sections of profile pipes and a construction corner.
First of all, you will need two hubs and a piece of round steel pipe to work. We insert the hubs into the pipe and scald.
The main stages of work
At the next stage, it will be necessary to cut a piece of a profile pipe of rectangular section of suitable length (depends on your height).
At the end of the profile pipe, you need to cut the saddle so that you can then weld it in the center of the wheel axis (round pipe).
After that, the author cuts another piece of the profile pipe and welds it perpendicularly. Both profiles are connected by a jumper.
To the end of a short profile pipe, the author welds a piece of the channel. Then the welds must be cleaned with a grinder.
Then it remains only to put on the wheels and fasten them. And note that at the very last moment, the author slightly changed the design.
For details on how to make a do-it-yourself wheel lever for lifting various weights, see the video on our website.
