Going in for sports is always beneficial. And if you don’t have the opportunity to go to the gym every day, then you can go the other way - make a simple 2-in-1 outdoor exercise machine: horizontal bar and parallel bars.
In this review, the author shows in detail how to make a simulator with your own hands. There is nothing complicated here, but there is a certain specificity.
Since there will be an upper fixation point (from a bar 100 * 100 mm), there is no need to go deep into the ground. It is enough to dig a trench about 10-15 cm deep.
We dig holes under the racks. Then we put reinforcement with a diameter of 8 mm in the prepared trench, and fill everything with concrete.
Racks are made of a square pipe 50x50 mm, wall thickness - 2 mm.
The horizontal bar is made of a 25 mm pipe with a wall thickness of 3 mm. The bars are made of 32 mm pipe, the wall thickness is 3 mm.
The main stages of work
Actually, all the work comes down to cutting the necessary dimensions with the help of a grinder. Well, then we weld the horizontal bar and the bars.
Next, we install the racks in the holes and in addition to them you need to weld an 8 mm reinforcement rod. Knead the mortar and concrete the bottom of the racks.
Details on how to make a 2-in-1 outdoor exercise machine can be found in the video on our website.
//youtu.be/anCZJDNMAVw
