HOMEMADE FOLDING BARBECUE

Send

We all love spring, summer ... the time when you can go out of town on a picnic with family and friends. But what a picnic without barbecue? Not always in the place where you arrive, there is material for the construction of a stand for skewers, barbecue. Therefore, I decided to make a small, compact folding barbecue.
There are many different types of barbecues on sale, but they cost differently ...
My brazier cost me nothing ...

All we need is:
1. Steel bar 3m long with a diameter of 4mm-8mm
2. Galvanized sheet 1.5mm I used old exterior window sills
3. Welding
4. Scissors for metal or grinder
5. The hammer

Photos of the manufacturing process itself, unfortunately, no. But I think that from the blueprint that I made to everyone everything will become clear ...
And so we transgress.
Steel rod mode into pieces sizes, which are indicated on the drawing fig. But this will be our foundation, the racks on which the side panels will be worn ...
Such racks will be 2pcs. fold and weld the cut rods. From the bottom of the rack, it is advisable to sharpen it slightly, so that it is better to insert it into the ground. Heavily sharp is also not advisable, since during transportation with sharp ends it can be damaged, or damage the bag or bag ...
Start manufacturing side panels.

In the drawing they are indicated by fig. b), fig. at).
Using a nail and a ruler (I could do it with a pencil and chalk), mark our future panels on a galvanized sheet, cut them out with a grinder or scissors.

We should get 2pcs blanks in fig. B) and fig. at)
The dotted line in the drawing indicates the bend line at an angle of 45 and the dotted line with a point of 180

Also in the drawing:
b ') - side view of the panel b)
c ') - front view of the panel c)
c ") - side view of the panel c)
After everything has been done, it remains to sharpen sharply the sharp ends of the sheet, this can be done with a file or in a circle for sharpening the cutters.
Brazier is ready !! I wish you a pleasant stay!