Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument.jpg)
There is a great need to fix the grinder in a stationary state. Say, sharpen the drill if there is no stationary emery on hand. I will show how to make an incredibly simple stand on which it will be possible to fix not only the grinder, but also other tools, such as a drill, dremel, building hair dryer, etc.
Making a stand for a power tool
We cut a rectangular piece of chipboard larger than your tool.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-2.jpg)
One such plate will not be enough, since it is too light, so we will cut another one. Apply on top and draw a marker on the contour.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-3.jpg)
We saw it with a hacksaw or a jigsaw.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-4.jpg)
Fasten with screws on four sides, pre-drilling holes.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-5.jpg)
Turn bolts down so that they do not spoil the view.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-6.jpg)
We apply a grinder in the middle, which must be fixedly fixed.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-7.jpg)
And mark the places for future fixtures.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-8.jpg)
We will need two more of these clamps. Pipes are fixed with such, they are full in construction stores of absolutely any diameter.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-9.jpg)
We drill a hole for plastic dowels.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-10.jpg)
We insert them into the holes with a hammer.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-11.jpg)
Screw the screw struts.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-12.jpg)
Screw the clamps.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-13.jpg)
Set the grinder in place.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-14.jpg)
We fix with clamps, tightening the fasteners.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-15.jpg)
Rubber gaskets will not create excessive force on the tool body and will not allow it to move anywhere. Now you can work.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-16.jpg)
If necessary, turn to the side. Very comfortably.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument.jpg)
And sharpen everything you want: at least knives, at least drills.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-17.jpg)
You can fix and dremel.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-18.jpg)
We fix the building hair dryer.
![](http://img.uaft2404.org/img/sdela-2019/kak-prosto-zafiksirovat-ruchnoj-elektroinstrument-19.jpg)
All examples are on the face. The stand is very simple and very comfortable. With a slight vibration, it will not roll over.
Also, before work, it is necessary to clamp the trigger or the tool switch with a plastic clamp or in another way. When working with the tool in this position, be extremely vigilant. I recommend making a foot pedal button so that when you press on it with your foot, the tool turns on.
Share
Pin
Tweet
Send
Share
Send