CONTAINER - THERMOS FROM A PLASTIC BOTTLE

Send

A very simple container with the effect of a thermos can be made in a short time from a plastic bottle.
This homemade product carries two functions: a shockproof case for transferring fragile things, such as a camera lens and a thermos container like a thermos, into which a vessel with a liquid is inserted, the temperature of which is tedious to keep. In general, there are enough useful properties.

The design is very simple and will require a minimum of detail and time from you.
So what do we need?

Two plastic bottles.
Foam rubber.
Lightning.
Strip of rubber (leather).

Making a container thermos.

The first thing to do is cut off the lower parts from the bottles. From one bottle with a low side and another with a high, see photo.

But first you need to find out the size of the thing that will be placed inside to fit all sizes under it.
After cutting, it is necessary to make holes for the thread on which the zipper will be held, since this will immediately be problematic.

Sew the zipper to both parts and the frame of the container is ready.

Now you need to cut the inner surface of foam. So that the foam does not come out every time with the extraction of things, it can be put on glue.

That's all. But I did not stop there and finalized the container with a rubber belt that tightly closes the zipper, thereby making our container waterproof.

Now your lens from the camera will be safe and sound.
The container diameters can be selected by the size of the bottle and the thickness of the foam pad. That is, you can make the case you need to fit your needs.

Send