Share
Pin
Tweet
Send
Share
Send
To make jewelry you will need:
- satin ribbons 6 mm wide 7 rainbow colors 1 m each;
- felt for the base;
- a candle;
- scissors;
- glue gun.
It is necessary to make the basis of felt, in this case, cut a circle with a diameter of 3 cm.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-2.jpg)
Stitch making
Cut all the strips into pieces 5.5 cm long. The length of the segments can be changed, if desired, for example, 6 cm or 6.5 cm.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-3.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-4.jpg)
Take one piece of tape and fold its ends together so that a loop forms from the front of the tape and secure the cut with a candle flame or lighter.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-5.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-6.jpg)
So do with all the pieces of tape. How much exactly stitches are needed depends on how tightly they are glued. I have about 60 pieces per jewelry.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-7.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-8.jpg)
Assembly of decoration.
Glue loops around the edge of the circle in the order of the colors of the rainbow. It took me 10 stitches.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-9.jpg)
Now gradually fill the base with loops, moving to the middle, alternating colors and arranging them in a checkerboard pattern.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-10.jpg)
Do this until a loose circle with a diameter of about 5 mm remains in the center.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-11.jpg)
To fill the middle, you should take 3 loops, glue together and roll up a tube.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-12.jpg)
Glue 4 more loops around the bundle of 3 stitches in a circle and attach this blank to the center on the base.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-13.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-14.jpg)
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-15.jpg)
Turn the fluffy over and stick a series of eyelets along the edge from the outside.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-16.jpg)
Now you need to attach an elastic band or hairpin and the decoration is ready.
![](http://img.uaft2404.org/img/sdela-2019/pushistie-raduzhnie-ukrasheniya-dlya-volos-17.jpg)
Share
Pin
Tweet
Send
Share
Send