Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami.jpg)
The style of decoration of this attribute can be completely different, it all depends on the theme of the event. I decided to present such a duet.
To create these accessories I needed:
- champagne;
- satin ribbons (5 cm and 0.5 cm);
- organza ribbon 1 cm wide .;
- beads of two colors;
- thick fishing line;
- glue moment;
- scissors;
- gold color foil;
- white wide lace;
- small flowers from satin ribbons.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-2.jpg)
In this MK, I decided to simply describe in detail the process of creating flowers, and placing them on a bottle is a personal fantasy of each needlewoman.
First, we make the largest element - roses. To do this, cut the satin ribbon into squares of 5 cm.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-3.jpg)
Then we fold it in half so that we get a triangle. The main thing is to accurately combine the corners.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-4.jpg)
Side corners are also pressed to the first two.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-5.jpg)
Having retreated down about 1 cm from the resulting corner, we cut off all the corners and carefully fasten all the layers of the tape with a lighter.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-6.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-7.jpg)
On one rose of such petals you need 5 pieces.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-8.jpg)
They will depict the middle of the bud. Now proceed to the next petals. To do this, add the square diagonally, as in the first case.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-9.jpg)
And already at this stage we trim the lower corners.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-10.jpg)
We seal the edges with a lighter, and press the side corners as here.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-11.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-12.jpg)
We also fasten them with fire. I needed 10 such petals for a small rose and 15 for a large one.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-13.jpg)
We begin to collect all the petals together. We take a small petal and grease the bottom edge with glue.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-14.jpg)
Then gradually wrap it in a tube.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-15.jpg)
You need to twist the "pockets" out, then you get such a nice center.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-16.jpg)
Then we begin to gradually glue it with small petals.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-17.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-17.jpg)
It is the turn of large petals. We also smear it with glue only on the wrong side, and paste it on the rest.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-18.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-19.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-20.jpg)
It is important to note that it is not necessary that the bottom edge be exactly the bottom of the previous petals. If you shift it a little, the rose will turn out nicer and more open.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-21.jpg)
In the end, it turns out such a beauty.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-22.jpg)
Since I will mount it on a flat surface, Cut off all the bumps below and glue it so that the petals do not fall out of the middle.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-23.jpg)
When I decided to make such bottles, I drew a rope with beads as an obligatory element in my imagination. But what, was my surprise when, in none of the shops of the city were they? I came to the conclusion that they would have to be done on their own. I bought a skein of the thickest fishing line and beads of those colors that perfectly fit my color scheme.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-24.jpg)
I cut the fishing line into pieces of the desired length, and then simply applied a drop of glue to the fishing line, strung a bead and gave it time to stick.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-25.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-26.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-27.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-28.jpg)
These are the cables I got.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-29.jpg)
I came to the conclusion that I will continue to do so in the future (economically, and there are always the right colors). For the following flowers I used organza and a thin satin ribbon.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-30.jpg)
Cut the organza ribbon into 8cm segments.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-31.jpg)
Then we fold them in half and fasten the edges with a lighter.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-32.jpg)
We collect all the obtained "droplets" on a thread and fix with a pair of stitches.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-33.jpg)
We perform the same procedure with a satin ribbon.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-34.jpg)
Then just connect the two bows together, and close the place of the knot of thread with a bead.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-35.jpg)
In the end, I came to the conclusion that the rose on the bottle would not look very impressive, so it was decided to make the background of tulle. Since I decided to use 2 roses for each bottle, I measured two stripes.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-36.jpg)
Then, we fold each strip several times and carefully cut out such a corner.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-37.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-38.jpg)
The result is such a Christmas tree.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-39.jpg)
We collect the lower part of the tape into thread with small stitches.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-40.jpg)
We tighten and fasten around.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-41.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-42.jpg)
Now, glue the rose in the center, and insert our cables.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-43.jpg)
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-44.jpg)
The whole subsequent process is a flight of fancy. She glued sheets of foil on the bottom of the bottle and covered it with lace on top. Well, the remaining elements are placed at your discretion.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami-45.jpg)
Here is a set I got.
![](http://img.uaft2404.org/img/sdela-2019/svadebnoe-shampanskoe-svoimi-rukami.jpg)
Share
Pin
Tweet
Send
Share
Send