Patriotic Victory Day Ribbon

Pin
Send
Share
Send

Traditionally, on May 9, a parade is held in each city. This holiday is special - it not only symbolizes the Victory, but on this day people remember the exploits of the older generation. One of the symbols of this special day is the St. George ribbon, which is pinned to the chest. But there is an alternative to such a symbol - a similar ribbon from the colors of the Russian flag.

To create a tape you will need:
1. A shallow ribbon depicting tricolor.
2. Satin ribbons 4 or 5 cm wide in three colors - white, blue, red.
3. Burner and glass.
4. Hot glue.

Fold the tape in the center to form a single loop, and glue the ends of the tape where they connect.

Under the ruler, cut the ends of the tape at an acute angle, as in the photo:

From each tape you need to cut off the squares. The size of the squares is either 5 by 5 cm, or 4 by 4 cm, depending on the width of the tape you have chosen. It will take two blanks of each color except red. There should be three scarlet squares.

To create a twig on a ribbon, you need sharp curved petals, which are created using the kanzashi technique. The square element must be bent diagonally, and you will get a big triangle.

Then, the workpiece is bent again in the center as shown in the photo.

The last bend is carried out along the center line of the triangle and then an acute angle is formed at the top of the element.

Cut the base of the blue petal with a burner. Under temperature, the atlas layers are soldered and the petal will be fixed.

Bend the petal the other way.

Perform similar actions with all the blanks, and you get the required number of petals for the branch.

Using hot melt adhesive, fix the petals in the center of the main tape.

Red and blue colors are glued in pairs directly to the tape.

A white pair of leaves first stick together.

And then it complements the branch from above.

The place where the branch originates is covered by a third red petal.

Turn the work over and fix the pin in the center of the product with glue. The pin is horizontal.
Bright ribbon for the parade is ready!

Pin
Send
Share
Send