DOOR REPLACEMENT: THE TEAPOT EXPERIENCE

Send

Agents of specialized firms offer to install doors for potential buyers on the street, in the store, even at the entrance of the house. But I hired a team to repair the two bedrooms, and the craftsmen promised to replace the doors if I prepared the appropriate material.
I needed to buy 4 doors. I did this by the “trial and error method”, as a result of which I came to the conclusion how to do this, spending a minimum of physical strength and money.
First measure the width and height of the old doors. At the interior and doors leading to the kitchen, bathroom and bath, it will be different. In addition, it is necessary to measure the openings, that is, the height and width of the doorways from concrete to concrete.
Typically, room doors have dimensions of 800 x 2000 mm. The kitchen door will be smaller: 700 x 2000 mm, the doors of the bathtub and toilet will be even smaller: 550 or 600 mm, the height may be only 1900 mm. After summing up what you need, view the Internet offers.
Now you can go shopping. But the main reference point to keep at the largest supermarket in the city.
But you will only see the door leaf at a time when it is better to evaluate the design in its full (assembled) form. In specialized stores, sellers are serving as consultants, they explain a lot.
Exhibited door patterns have the most diverse, inviting, and even exclusive design. But you stubbornly keep in mind the interior of your home, and pick up the door according to him, so that in the end it does not turn out to be a "golden button on a modest sweatshirt."
A door made of low-quality raw materials can skew in a year or two. Doors made of oak, walnut, pine and other solid wood are of high quality, but expensive. Products from glued massif will be cheaper, but the tones of individual glued areas may not coincide in tone.
Plates from wood waste (MDF) are most popular as a material for doors, since they are quite effective and proportionate in price. Such doors tolerate moisture and temperature extremes, they can be safely installed in bathrooms and toilets.
Particleboard (particle board) looks good, inexpensive, but afraid of moisture. Doors from it are good in a room interior.
Glazed doors are spectacular on their own. Used clear, textured, colored glass. But when the doors slam, the glass may crack or break. Therefore, it is worth giving preference to thick (4 mm) glass or laminated (triplex).
When you have made your choice, purchase a complete set (box), otherwise at the climax of the installation of the door, you may not have any important details. What do you need?
Door leaf. In our ideas, the door itself.
Side bars. This is a closed box of 4 bars, if there is a doorway with a threshold, or 3 if there is no threshold. The bars are secured with spikes using waterproof glue.
Platbands. Door trims mask the hassle between the door frame and the wall. They are made of the same material as the door leaf.
Hinges hinged. Screw (screws screwed into the door and block), traditional overhead (mounted), mortise (installed in special recesses), combined.
Door handles. Brass handles are anticorrosive, have a noble golden hue. Chrome and nickel-plated handles adorn the product, especially good for steel doors. Handles made of steel, silumin, aluminum, high-quality alloys, noble wood - a large selection. But do not forget that cheap pens can be aesthetic, modest and elegant at the same time.
Door stop. It is a stopper for doors protecting a door from blow to a wall. A floor stop is more often used, but if the floors are parquet, you need a wall. It is better to purchase a magnetic stop that locks the door in the open state.
The main problem that upsets the owners when replacing doors is the connection problems with existing wallpapers. Sometimes the width of the platbands is not enough to close the blemishes of the master, if the wallpaper was pasted earlier. Therefore, when repairing an apartment, first of all they clean the doorways from the old box, and then they plaster the walls and do other dirty work.
The door is assembled on the floor, if there are no more convenient planes, put in the aperture, reinforced with mounting foam, only then paste the walls. Complete the installation of platbands. Such a door has no aesthetic flaws.
But my doors, opening on one side to the previously renovated living room, required gluing. Fortunately, the platbands almost closed the master’s flaws.
But in the hallway the flaws were so obvious that the repair of two bedrooms and the installation of doors had to add processing and pasting one of the walls of the hallway of the room. My friend in a similar situation went the tried and tested way: she peeled off the old wallpaper, cut off all the excess with a sharp short knife, plastered it and again glued it.
Good luck in acquiring new doors and installing them, but remember that nothing will happen without you.